What Will Boarding Up Windows Be Like In 100 Years?
The Benefits of Boarding Up Windows
Protecting your property against damage from storms is achievable with making windows a board. But, it's labor-intensive and must be completed with the assistance of another person.
Measure your windows to ensure that the plywood will fit comfortably. Make sure you have a power drill and circular saw to cut the boards.

Seals Windows
Boarding windows is a tried and true method for protecting property in the event of a storm. It's a relatively simple process that requires a few tools and a bit of time, but it can be extremely efficient.
The purpose of boarding up windows is one primary goal: to prevent the glass from breaking because of debris during the storm or other severe weather. The boarding is typically constructed of plywood, and it is fixed to the frame of the window with either a screw or nail. There are other materials that can be used to board up windows, such as duct tape or zip ties, however plywood is cheap and easy to work with, making it an obvious option.
To begin the boarding process, take measurements of the height and width of each window. This will allow you to cut a 5/8-inch thick sheet of exterior-grade plywood (OSB) or oriented-strand board. Make sure the dimensions of the plywood meet the size of the window frame, and leave one inch. There should be a 4 inch gap between the edge of the plywood and window frame in order to allow for expansion.
After the plywood has been cut to size after which you can screw into the hanger bolts with nuts. These bolts are available in a variety of hardware stores and home improvement stores. They are designed to be attached directly to the studs of the house. The plywood holes should be drilled at a diameter that matches the hanger bolts and spaced apart by a minimum of 2 inches on all sides. After the storm is over and the plywood is removed and the bolts removed, they can be removed from the studs.
When a hurricane warning is issued, it is important to begin the boarding process as soon as you can. This will allow you to make sure you have enough plywood to safeguard your home and also give you the chance to identify any problems before the storm hits. The entire process should take about 30 minutes per window, and should be completed by two people.
Prevents Break-Ins
One of the main reasons why property owners use boarding up windows is because it acts as a deterrent to burglars. Burglars will target properties that they know they can easily enter. If they see the property boarding up, they might be hesitant before trying to get in. The windows that are boarded up prevent burglars from being able to view inside the house. This is a significant security advantage.
The act of boarding up windows is an excellent way to protect your property from the elements. If you live in a region that is prone extreme weather, you should board up windows to shield your property. By covering windows with plywood, you can prevent rain, snow, and other debris from getting in. This will help you save money on costly repairs and replacements.
It is crucial to choose the right materials when deciding which window to board. The best choice is exterior grade plywood, which is able to stand up to the elements. You will need a drill for drilling holes in the plywood, along with screws, caulk or putty to seal the holes. Before you begin, be sure to measure your window openings and mark where the screws will be. You should also note the plywood panel that is attached to each door or window. Once you've got all your items, it's time to affix your windows.
While boarding windows up can deter burglaries, this technique isn't foolproof. It is still possible for burglars to circumvent the boarding, and it's not always easy to put in place. If you rely solely on blocking your windows, you could overlook other security measures that can protect your home.
One of the most effective ways to stop burglaries is installing security fencing. This is a great choice for vacant homes, and it can be an excellent complement to boarding your windows. However, this method is not a good fit for commercial or residential structures which want to maintain an appearance.
Reduces Heat Loss
In addition to protecting your home from burglaries, boarding up windows can help reduce the amount of heat that escapes through your windows. About two-thirds loss from a home or building is due to inefficient windows. This happens because of the combination of convection, radiation, and conduction. Radiation occurs when warm windows glass comes into contact with cold air which causes it to radiate heat away. Convection occurs when hot air rises before colder air replaces it. And conduction is when heat flows through a window's frame which is often made of metal.
Windows that break can pose a problem for many businesses and homeowners regardless of whether it's because of severe weather or vandalism. By boarding up a window, you can hide any jagged or rough edges and allows you to keep your business open until the window can be repaired. This is especially crucial for commercial areas that are susceptible to robbery attempts by thieves who wish to keep their eyes off the window.
There are many alternatives to plywood boards to protect against storm damage however, they do not offer the same level of security as a sturdy piece of wood that is encased in a window. For example, roll-down hurricane shutters are popular for insulating homes in storms, but they could pose a risk to safety if they aren't securely anchored and require a long time to install and remove. RepairMyWindowsAndDoors is to make use of strips of self-stick rubber weather seal which you cut to fit the window's dimensions. Seals can be pressed in place to seal gaps, allowing cold air to pass through and warm air to exit.
If you're looking for a more long-term solution, you should consider installing energy-efficient windows with low-e coatings that permit the sun's radiant heat to penetrate but block the transfer of other kinds of heat. Consider draft stoppers. It's simply a tube of fabric that sits on the bottom of your windows, and blocks cold, escaping air from entering. These options are more expensive than a complete window replacement, but they'll help you save money on energy in the long run.
Saves Money
While boarding up windows may seem like a costly service to provide in a crisis however, it actually saves money over the long term. By sealing windows and doors it will reduce drafts which cause heat to escape from the business or home. As a result, you will see lower energy costs in the winter months.
Boards are easily accessible and affordable they are a great alternative for temporary protection from an incoming storm. Before you are able to use them as a security for your home you must take measurements for each window. Take measurements horizontally within the trim and vertically between the bottom of the top trim and the sill. Then, add eight inches to both the width and height to ensure a snug fit and allow for expansion in the event of a hurricane. A saw is needed to cut the OSB or plywood and drilling tools are required to mount the boards. Install the boards before an event and take them off when the weather is stable.
A professional boarding-up company can do the job faster and more efficiently than someone trying to do it by themselves. These professionals will use hurricane clips instead of nails to adhere the boards to the property, which will prevent damage to the frames. After the storm, they will take down the boards and restore your property to its original state.
If you are a property owner for a commercial business and you have a window that is broken, it could be a major problem. It's not just a problem for the appearance of your building, but it can also cause theft and other security issues. Boarding up the broken windows will keep criminals and other opportunists away from your property until you are able replace it.
It is also a good idea to put up a fence around vacant properties that you own. Properties that are vacant are more likely to be targeted by squatters as well as are easy targets for arsonists, therefore this is a crucial step to ensure that your property is secure until it can be used again.